FITCO FLED-32S2090D Software Free Download

FITCO FLED-32S2090D LED TV

FITCO FLED-32S2090D is a 32 inches HD Ready LED TV with a resolution of 1366×768. FLED-32S2090D is a non-smart tv. FLED-32S2090D LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Download Here

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-32S2090D has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-32S2090D

Display Size: 32″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution:

All the pictures and specification details related to FITCO FLED-32S2090D in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-32S2090D USB software or backup dump file. A few benefits are described below:

The dead board can be recovered and operational by loading the given software backup file
The Original Remote and Logo as per the model specifications
Money saving instead of changing the mainboard
Time-saving instead of arranging a new board
Customer satisfaction to do an urgent job
Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-32S2090D USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

The working board may go to the standby position
Version change may cause trouble
Panel screen parameters may be changed
FITCO FLED-32S2090D Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-32S2090D Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.