ISTRONG GX-4444 HD Satellite Receiver
ISTRONG GX-4444HD dump file or the flash file is a boot information file that contains the satellite receiver software/programs in the receiver’s EEPROM or flash IC or memory IC. The main processor/microcontroller retrieves the information from the memory when it is powered on to know how to operate/boot up. If it cannot get the boot information, it may remain stuck on the power/red light or boot logo screen.
Suppose the flash IC/memory IC of the ISTRONG GX-4444 receiver is damaged for any reason or its software/firmware does not work properly for any reason. In that case, the main controller will not receive the boot/basic information and the satellite receiver will not power up. In this situation, you will need to reprogram the flash IC with the appropriate hardware dump/flash file to bring the receiver to a normal state. ISTRONG GX-4444HD dump files are available below for technical and user support.
Information and Specifications:
Manufacturer: ISTRONG
Box Model: GX-4444 HD
Main Board:
Main Controller or Chipset:
Box Type: Digital
Flash Type: SPI SOP8/SOIC8
Flash Size: 4 Mb
Software Type: Backup Dump
Software Size: Mb
Download File Format: ZIP
Download Type: Free
Note:
The software for ISTRONG GX-4444HD receiver shown below is a backup copy, which can be loaded into a defective receiver using the programming tool or loader tool. The SPI flash memory can be upgraded using the USB upgrade method or the RS232 upgrade tool, or downgraded to an older version on a properly working satellite receiver. Kazmi Elecom Team is not responsible for any kind of damage/loss caused by uploading/downloading software. Always make a backup copy before loading the USB software or writing it to the SPI flash memory.
