715G5749-M03-001-004K Software Free Download

715G5749-M03-001-004K LED TV Board

715G5749-M03-001-004K is a simple ATV Driver Motherboard intended for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. For complete setup, the power input module and LED Backlight Inverter driver Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart (optional).

Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. 715G5749-M03-001-004K is a Full HD-supported LCD LED TV controller board with a maximum resolution of 1920×1080. It can support 24 to 48-inch HD and FHD panel screens. The main processor is made by Mstar and its graphics are also good. 715G5749-M03-001-004K firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 715G5749-M03-001-004K

Main Chip: MST6931XP-Z1-VB

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 8 Mb

Sound Chip: NA

Tuner IC: TDST-H030F

Screen supported: 24-48 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input

Pros:

There are many advantages to installing the given 715G5749-M03-001-004K USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given 715G5749-M03-001-004K USB software or backup dump file. But it depends on the technician or user as per his understandings. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

715G5749-M03-001-004K Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only in case the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

715G5749-M03-001-004K Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications and latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

715G5749-M03-001-004K firmware for free download:

• 715G5749-M03-001-004K AOC-24-DUMP
• 715G5749-M03-001-004K AOC-32-DUMP