6681M3C1 Smart Android Board
6681M3C1 is a combo three-in-one FHD LED TV Android Board. It has supported a 1920×1080 Full HD resolution and a Refresh Rate of 60 hertz. It has multiple connectivity input interfaces for the user such as dual HDMI input ports to connect external STB (set-top box), Blu-Ray players, and gaming consoles. It has more than one USB port to connect portable hard disk drives and other USB devices and users can play multimedia files as well by these USB input interfaces. RCA interface is available for RGB connectivity. The Scart interface is also available on this board. LAN connection for wired internet connectivity.
It has Dolby Digital DTS Support 20 Watts sound output and HDR Display viewing. 6681M3C1 can support the Smart TV Features as Android, and Google Play Store. 6681M3C1 firmware files are given below for free of cost download to support technicians for rectification of LED TV Software problems. The Backlight driver controller board and Main Power Input Circuit module are built into this board with the addition of dual tuner ATV and DTV. This board has Android version 9.0 with 1GB RAM and 8 GB ROM.
Technical Features & Specifications:
Brand: China
Board Model: 6681M3C1
Display Format: FHD 1080P
Screen Type: LED
Features Format: Smart
OS Version: Android 9.0
Chipset: MTK6681
Processor: Arm-Cortex
Graphic Processor: Quad-core
RAM Capacity: 1 GB DDR3
Storage Memory: 8 GB ROM
Screen Resolution: 1920×1080
No of HDMI Ports: 2
No of USB Ports: 2
Wi-Fi Type: Wi-Fi
Built-In Wi-Fi: Yes
Ethernet (RJ45): Yes
Speaker Output RMS: 20W (10W*2)
Tuner: ATV & DTV (DVB-T2, DVB-C, DVB-S2)
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: 120 W
Service Menu: Source+2580
Firmware Type: USB Update
Firmware Name: 6681_DVBT_8G.bin
Product: Premier, Goldstar, VOX, Dijitsu
Caution:
All the Images, features, and specifications shared in this post related to board 6681M3C1 are for reference only. If the user does not have any repairing knowledge or experience then he should go to the nearest expert technician and not try to repair or install firmware. Sometimes, the user thinks that there is a software issue but maybe it is something else. it may be a hardware issue. If the Android LED TV is on standby mode, it shows the hardware fault, and if hangs on the logo then may be a software/hardware fault. If the Smart LED TV is slow and some applications not performing well then the user can do the factory reset only.
6681M3C1 EMMC Backup:
This board has an 8GB eMMC memory capacity. The user can read the EMMC backup files by Pen drive but for rewriting a backup of EMMC the user should jtag the mainboard 6681M3C1 and rewrite by a programmer or special ISP tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then the user can rewrite the backup, otherwise, it is on standby or red light due to hardware issues. So, first, diagnose the fault. In this case, no need to write emmc backup.
Note: The following given software is a USB bootable and EMMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and lack knowledge of loading/installing software/firmware or EMMC backup files, or are facing any issues during firmware installation then visit and read here first.
How to Download:
Download all parts of your required firmware and then extract any one of them you will get the folder. Then copy the files to a USB disk or write an EMMC backup with a programmer. For more Details about the download process watch the video Click Here
6681M3C1 Firmware for free download:
