HK.T.RT2831P533 Firmware Free Download

HK.T.RT2831P533 Smart LED TV Board

HK.T.RT2831P533 is a smart Android integrated digital converter Realtek 2831 Intelligent DVB-T2 Network LED TV Board. It is suitable for the LVDS interface. It can support 42-65 inches LED TV Screen panels with maximum resolution FHD up to 1920×1080. HK_T_RT2831P533 is a Combo three-in-one motherboard. The power card module, backlight driver module, and ATV board are built on a single PCB board. Multi-Input interfaces for user convenience such as dual HDMI input, dual USB, VGA port for PC and Laptop connectivity, AV, and LAN port for wired internet connectivity. It is also built in a Wireless interface.

Download Here

HK T RT2831P533 installed with Kivi and other brands of LED TVs. Its dual USB interfaces are convenient for users to play multimedia files or upgrade software. ATV, DTV, and CATV Reception are supported by HK.T.RT2831P533. The HK.T.RT2831P533 USB bootable Software file is shared below for the support of technicians.

General Specifications:

Model: HK.T.RT2831P533

Main Chipset: RTD2831

Resolution Supported: 1920×1080

CPU: ARM Cortex A53 Quad-Core

CPU Frequency: 1.3 GHz

GPU: Dual-Core

OS: Android 7.0

Ram: 1 Gb

Rom: 8 Gb

Audio Output Power: 10 W (5Wx2)

Energy consumption: 35W

Backlight:

Backlight Power:

Service Code:

Firmware File: Install.img

Firmware Type: USB upgradeable Firmware

Product User: KIVI 24HR52GR

Caution:

All the pictures and specification details related to HK.T.RT2831P533 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given HK.T.RT2831P533 USB software or eMMC backup dump file. A few benefits are described below:

The dead board can be recovered and operational by loading the given USB software or EMMC backup file
Remote and Logo may change at your own choice to satisfy the customer
Money saving instead of changing the mainboard
Time-saving instead of arranging a new board
Customer satisfaction to do an urgent job
Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given HK.T.RT2831P533 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

The working board may go to the standby position
Remote Control may not work and the Logo may change by writing the given software
Panel screen parameters may be changed

HK.T.RT2831P533 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

HK.T.RT2831P533 EMMC Backup:

This board has a 8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard HK.T.RT2831P533 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

HK.T.RT2831P533 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download HK-T-RT2831P533 Firmware File:

Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

HK.T.RT2831P533 Firmware file for Free Download: